Ablestik：

導電銀膠:主要經營有ABLEBOND 84-1A、84-1LMI、 84-1LMINB(B1)、 84-1LMISR4、84-1LMIT(T1)、 826-1DS、826-2、2600AT、2600BT、2185A、2030SC、2100A、3185、8290、8340、8360、8352L、968-2、979-1、71-1、JM7000等一系列產品,適用于半導體(IC)封裝(如DIP/SOP/TO-92/BGA...)、LED(如普通發光二極管/LAMP/大功率管/數碼管...)等領域,用于各種貼片、點膠、背膠等工藝.

絕緣膠:主要經營有ABLEBOND84-3、84-3J、84-3LV、84-3MV、789-3、789-4、2025D 、2025M、 2035SC 、8384、8387A、8387B、2039H、DX-10、DX-20-4等一系列產品,適用于半導體(IC)封裝、攝像頭(CMOS/CCD)工藝、LED、智能卡等領域,用于各種貼片、或有粘貼的等工藝.

UV膠:主要經營有ABLELUXHGA-3E、HGA-3S、A4021T、A4035T、A4039T、A4061T、A4083T、A4086T、A4088T、A4502、CC4310、AA50T 、BF-4 、OG RFI146T等一系列UV紫外固化膠,適用于光電、光電儀表、光纖、手機攝像頭(CMOS)等領域;如手機攝像頭Lens固定,光纖耦合器(Coupler),激光器(Laser),跳線(Jamper),衰減器(Attenuator),探測器(Detector)等。

膠膜:主要經營有ABLEFILM506 、508、550S、561K、570K、5020、5020K、5025E等一系列產品,適用于各種電子產品,軍工產品,電源等。

樂泰EA 3335透明UV耐熱耐水耐腐蝕光通訊光路膠

粘度 5000-7000cp 固化條件 UV 硬度80shoreA Tg值 135℃ CTE,低于Tg溫度59ppm/℃ CTE,Tg值溫度 ppm/℃

透明，UV快速固化，良好的耐熱，耐水，耐化學腐蝕性，低揮發。

LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.

TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Coefficient of Thermal Expansion, :
Below Tg, ppm/°C 33
Glass Transition Temperature (Tg) by TMA, °C 240
Bulk Thermal Conductivity, W/(m-K):
@ 90°C 1.1
@ 165°C 1.0
Tensile Modulus, DMTA :
Cured 30 minutes @ 300oC N/mm2 10,000
(psi) (1,450,377)
Extractable Ionic Content, @ 100°C:
Chloride (Cl-) <10
Sodium (Na+) <15
Potassium (K+) <15
Decomposition (in N2):
TGA analysis @ 10oC/ minute ramp from 25 to 400
oC
@ 340oC, % 0.2
@ 400oC, % 0.3
Electrical Properties
Sample cured 30 minutes @ 300oC
Volume Resistivity, ohm-cm ≤0.01
安徽ablestik 5020膠膜 506膠膜 安徽漢高代理 上海漢高代理 蘇州漢高代理 安徽導電膠 安徽樂泰代理 北京樂泰導電膠