LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.

TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.

漢高北京總代理 Ablestik 貝格斯 道康寧 3M LORD洛德經銷商
LED、電源、新能源行業膠黏劑供應商，技術人員提供整體用膠解決方案。
灌封膠、密封膠、導熱硅脂、導熱墊片、防靜電產品、UV膠等
有機硅灌封膠，導熱灌封膠，三防漆，密封粘接膠，漢高漢新，漢高樂泰，環氧樹脂灌封膠，導熱粘接膠，LED膠黏劑，電源灌封膠，電子膠水，北京導熱灌封膠，北京樂泰，北京三防漆，北京膠黏劑，厭氧膠，螺紋膠。